Friday, July 15, 2011

Octopus Hang On Bio Pellet Reactor's

The latest and greatest in Biopellet Reactor specifically designed for to hang on the side of a sump or aquarium.

These Revolutionary Media Reactors have a fluidizing cone bottom design to help keep the Biopellet media in suspension and evenly disperse the water upwards, without restricting the flow through the unit. The convenient design allows for these reactors to hang on the side of a sump or aquarium.

OCT-BRH90 Hang On Bio Pellet Reactor 3.5″ 700ml
OCT-BRH100 Hang On Bio Pellet Reactor 4″ 1000ml

Octopus 250mg Ozone Generator

Octopus 250mg Ozone Generator

-Ozone output: 250mg / h
-Gas source: air source
-Built in Drier Box and Silica Gel
An advanced method of water purification for the Most Absolute – Crystal Clear Water. Ozone use raises the ORP of your aquarium water, increases oxygen levels, decreasing dissolved wastes, removes yellow coloration and effectively kills numerous harmful pathogens.

Though many ozone users utilize their skimmers as a type of reactor for ozone injection, we recommend using our new Octopus Ozone Reactor for the best and safest results.

Bubble Magus Seaside Aquatics Magnet Probe Holder

Bubble Magus / Seaside Aquatics Magnet Probe Holde Probe holder can fit up to four probes. It’s design to hold ph, ORP, salinity and/or temp probe. It has a magnet on the back and can be easily install on the sump wall, baffle divider or aquarium wall.

Magnetic can work up to 3/4″ thick acrylic or glass.

Friday, July 1, 2011

Hanna Calcium Checker Available for Pre-Order

Pre-Order your Hanna Instruments 758 Calcium Checker today for only $49.50! These are expected to start arriving from Hanna Instruments in approximately 6-8 weeks.

HI 758 Calcium Checker HC is supplied with 2 sample cuvettes and caps, reagents for 15 tests, (1)1.5V AAA battery, and instruction manual

HI 758 Calcium Checker Specifications:
Range 200 to 600 ppm
Resolution 1 ppm
Accuracy @ 25°C ±6% of reading
Light Source light emitting diode @ 610 nm
Light Detector Silicon Photocell
Environment 0 to 50 °C (32 to 122 °F); max 95% RH non-condensing
Battery Type (1) 1.5V AAA
Auto-off after 10 minutes of non-use
Dimensions 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5")
Weight 64 g (2.25 oz.)
Method adaptation of the zincon method