Sneak Peak - Coralvue's LumenBright Full Hood

Coralvue's new hood is based on there Lumen Bright reflectors. These are some of the best reflectors we have seen. The hood is large due to the design of the reflectors, but if you are looking for a MONSTER LIGHTING SYSTEM, these will be hard to beat. With 2 full lumen bright reflectors for your halides, 4 T5's and LEDs, you'll have a ton of light.

All of the ballast on this fixture are external with some really high quality connectors to mate to the power supply box. All of the ballast and LED's have there own power cord to isolate each light on there own timer.

These will be available in 2', 3', 4', 5' and 6' fixtures and they are all 18" wide. The 48" fixture is estimated to be around 1299 retail, but final prices are not complete.

Here are some links to larger pictures.
Top Fixture
Bottom Fixture
Bottom Fixture Turned On

If you could like to preorder one now, just call us 317-895-9005 or email sales@premiumaquatics.com and we can setup a preorder, then finalize price with you after it's complete.

New Coralvue Extreme Skimmers coming

The Coralvue Extreme line is getting a face lift and a new pump. They will include the new Sicce PSK-600 for Model 160 and PSK-1000 models. The newer Sicce pumps pull more air with less watts then the previous models. They are expected Mid September. You can preorder on our website.

Extreme SX 160 Protein Skimmer...more info. Price: $294.99
Extreme SX 200 Protein Skimmer...more info. Price: $314.99
Extreme SX 250 Protein Skimmer...more info. Price: $499.99
Extreme SX 350 Protein Skimmer...more info. Price: $679.99

Premium Aquatics
317-895-9005
http://www.premiumaquatics.com

Premium Accudoser II Peristaltic Doser

Premium Accudoser II Peristaltic Doser

Perfect dosing pump for two part systems. Doses 1.5 ml per minute +/- 5%. Use your controller or a digital appliance timer that can be timed by the minute to dose it for the correct number of minutes (example: dose of 30 ml, run pump for 20 minutes a day). Get one pump for calcium and one for alkalinity, a third pump can also be used if dosing Magnesium. Uses standard airline tubing (not included). We do not suggest using this pump for auto top off systems. The flow rate is intentionally 1.5mL per minute which makes it too slow most auto top off needs. • Flow rate 1.5mL per minute

• Will not back siphon
• Super quiet
• Quad Roller design
• Made in the USA
• Replacement Santoprene roller tube readily available.

Premium Accudoser II Peristaltic Doser Price: $99.99

Eshopps Magnetic Probe Holder

Eshopps new Magnetic Probe Holder is expected in about 2 weeks. It's going to be a great device to organize your probes in the sump, just attach via the magnet and put your probes in. Pretty cool.

You can sign up to the "wait list" online and you will get an automated email when they are in stock. Then you can order online or call us. Or if you want to preorder, put in an official order, you'll have a guaranteed spot in line. You won't be charged until ready to ship. To preorder, you can email sales@premiumaquatics.com or call us 317-895-9005

-Hold three probes
-Dual purpose holes
-Strong magnet
-Heavy duty

Eshopps Magnetic Probe Holder Price: $29.99

AquaIllumination Modular LED Light System - BLUE OPTION

AquaIllumination Modular LED Light System are now available in the standard "White" which is 2 6500K white LED to 1 Blue LED per bank. Or they have a new BLUE option which is 1 x white, 1 x reg blue and 1 x Royal Blue to give tanks more of a 20K look. Click on HERE for more info.

Reduced Energy
The AI modules are some of the most efficient lighting products on the market. Because of the lower energy consumption, an AI module will realize over a 1/3 savings when compared to the equivalent us of a low output metal halide (250W) bulb.

No Heat Increase
The AI shows less than a 1 degree water temperature increase over a 12 hour period. A low output metal halide (250W) bulb in the same configuration shows an increase of over 15 degrees. Because of this, it is unlikely that aquarists will have to use chillers when running AI modules resulting in substantial savings from equipment purchases and energy consumption.

8 Times Longer Life
The AI’s modules are rated for over 50,000 hours providing for years of maintenance free and environmentally friendly use. Metal Halides require costly annual replacements due to deteriorating output and unpredictable color drift.

Built in the USA
Every AI product is made with high quality components. We assemble each unit at the AI headquarters and have been doing so since 2007. We test all critical components in-house including a PAR output, heat output, and electricity consumption test after a 24 hour burn in period for each module to ensure that each AI module is of the highest quality.
Licensed under U.S. Patent Nos. 7,200,018 B2 and 7,473,008 B2.

Upgradability
Your needs as an aquarist can change, and the AquaIllumination™ system is designed to change with you. Our modular design allows you to order upgrade packages as your needs evolve. Whether it’s to increase the length of your system or to get the latest in LED technology, our modular approach allows you to upgrade without losing your current investment.

Warner Marine ecoBAK ULNS Pellets

EcoBAK ULNS Pellets are a unique and revolutionary probiotic product that will change the way marine and reef aquariums are maintained. EcoBAK is a biodegradable polymer that serves as a stable and consistent organic Carbon food source and substrate for bacterial strains that consume organic compounds including Phosphate and Nitrate. In effect, ecoBAK reduces nuisance algae, clarifies water and supplies Planktonic bacteria as a food source for corals in the reef aquarium. EcoBAK works naturally, with NO harmful chemical additives.

PATENT PENDING

The ecoBAK system requires the use of a properly sized and efficient protein skimmer to export the additional waste products produced as the ecoBAK cleans the aquarium. Ecobak should be used in a fluidized media reactor with the output directed into the same area as the protein skimmer intake.

Directions for use: Use 500ml of ecoBAK per 100 gallons of true water volume. Rinse the ecoBAK in purified fresh water. The pellets can be soaked in purified fresh water overnight to reduce floating pellets. Add the rinsed pellets into a properly sized fluidized media reactor. Attach a pump to the reactor and adjust to flow approximately 100 gph per liter of ecoBAK. The proper amount of flow will create a gentle tumbling effect inside the reactor. Direct the output of the reactor into the same area as the protein skimmer intake. Within 3-4 weeks the ecoBAK will be sufficiently colonized with bacteria to begin reducing organic compounds. Aquariums with high bio-load may experience a short period of temporary water cloudiness.

ecoBAK comes in 3 sizes.
Warner Marine ecoBAK ULNS Pellets - 250 ml Price: $19.99
Warner Marine ecoBAK ULNS Pellets - 500 ml Price: $34.99
Warner Marine ecoBAK ULNS Pellets - 1000 ml Price: $59.99